❗ Information ❗

- These are single-sided carabiners with a cool shape, printed on clear acrylic. The metal gate at the top opens so you can hook it onto a bag strap or similar!
- The available inner space is difficult to measure, but I would recommend hooking it onto a fabric bag strap or similar up to 30mm in width and up to 6mm thick. You might find it difficult to hook it onto a rigid object wider than 20mm (softer objects/fabric should be fine regardless).
- For attaching charms to the base: the round holes are about 5mm in diameter, which should comfortably accommodate the usual ball chains and normal U-clasps. For larger/irregularly-shaped clasps, I would recommend attaching a jump ring to the hole to hook the clasp on.
- The print side is protected by a thin layer of acrylic, so it won't get scratched off.
- Charms are approximately 90 x 55mm, 3mm thick.

❕ Note ❕

- Charms come with a protective film on both sides. If the acrylic appears to be cloudy/scratched on arrival, it's most likely due to the film. Remember to peel it off!
- The weight-bearing limit of these carabiners is untested and not guaranteed. Do not use as a substitute for a real load-bearing carabiner - please treat these as decorative accessories.
- While these carabiners were made with the intention of being used to hold other charms, it is not recommended to attach too heavy of a load to it. Please be aware that handling it forcefully may break and/or deform the acrylic.