Please refer to the 3rd pic for the names of each variant if you're unsure!

❗ Information ❗

- These are double-sided carabiners with different designs on each side, printed on clear acrylic. The metal gate at the top opens so you can hook it onto a bag strap or similar!
- The inner space is approximately 57mm x 10mm. You might find it difficult to hook it onto a rigid object wider than 30mm (softer objects/fabric should be fine regardless).
- For attaching charms to the base: the small round holes are 3mm in diameter, which should accommodate the usual ball chains and normal U-clasps. For larger/irregularly-shaped clasps, I would recommend attaching a jump ring to the hole to hook the clasp on.
- The bigger "spool" holes are not really intended for holding charms, but can be used as such with ball chains - these are approximately 5mm in diameter.
- You can put a ball chain or jump ring + clasp through the top corner hole to use this as a regular acrylic charm instead! (Not provided with purchase.)
- The print side is protected by a thin layer of acrylic, so it won't get scratched off.
- Charms are approximately 86 x 57mm, 3mm thick. (Smaller than a real cassette tape)

❕ Note ❕

- Charms come with a protective film on both sides. If the acrylic appears to be cloudy/scratched on arrival, it's most likely due to the film. Remember to peel it off!
- The weight-bearing limit of these carabiners is untested and not guaranteed. Do not use as a substitute for a real load-bearing carabiner - please treat these as decorative accessories.
- While these carabiners were made with the intention of being used to hold other charms, it is not recommended to attach too heavy of a load to it. Please be aware that handling it forcefully may break and/or deform the acrylic.